BIOS

Model 3xx BIOS Update  vGV3_030 10/12/00
Although the 30 level is designed for all 3xx models, it only contains updates for the 344 and 324 models. You may continue to use the level 28 BIOS on other models.

Model 3xx BIOS Recovery vGV3_030 10/12/00
This diskette allows you to recover from BIOS update that did not complete properly because of a power failure or other reason. If you have a 28 level BIOS, you must use the level 28 BIOS Recovery disk.

Model 2xx BIOS Update v1.21.14 11/25/97
4695-211 SN < D5425 w/C&T65535/40 may require 1M VRAM to prevent lcd video ghosting

Model 022/032 BIOS Update RA-107 03/12/98

IBM PC 300 GL/PL BIOS Update
Required for early models

Proxy Configuration Utility v1.01 03/04/98
This utility allows you to configure a 4694-124 with a 4695-0x2 Distributed System 

Video

Model 3xx

Model 211

Model 022/032  adapter photo

Model 002/012  adapter photo

Network

Service

Service/Diagnostic Diskette v6.05 08/20/02
Use the service/diagnostic diskette to check that the system unit  and attached devices work correctly during installation and after any repair actions. 

Other

LCD Contrast utility
Windows 95/NT model 3xx/2xx only    DOS All models

PCMCIA Drivers for DOS/Windows 3.11 v1.04
For Windows 95/NT use the Cirrus Logic drivers and for Warp 4 use the Matsushita drivers

Model 2xx Keyboard/Mouse Fix for Windows 3.1
Enable keyboard and mouse when starting

Model 2xx COM Port Utility
Disable system board RS232 com ports

Model 002/012/2xx VESA Video Mode test program

Model 002/012 LCD Adapter Mono to Color Upgrade

Model 002/012 Enable PC750-P90 Keyboard Program

Model 002/012/2xx/3xx Touch/MSR Fix
Microcode patch for POSS for Windows 1.4.0 and POSS for OS/2 1.6.0 systems

Model 002/012/2xx/3xx Keyboard Hot Plug Fix
Hot plug keyboard - driver patch for Windows 95 systems
 

Note

To rebuild diskettes from image files, download the EXE file, insert a diskette in drive A: and run the EXE file. If you are rebuilding the image under Windows NT®   you must go to a command prompt and enter "FORCEDOS filename.exe to rebuild the diskette